Zum Hauptinhalt springen

Ultra module and tool reference

Mit FlammiCraft ausgelieferte Mod-Version: 2.6.0

Diese Detailseite ist derzeit auf Englisch verfügbar.

Overview · Modules

Detailed descriptions from the integrated Ultra module help. Functions tied to another mod require that integration. Configured controls refer to the current key bindings.

The black Panel Link Wire joins panels and pairs gearboxes, keyboards and computers.

Shift + right-click cycles wire mode and clears the pending endpoint. The tooltip shows the current mode.

In network mode, right-click two panels to join their networks; connecting them again removes the link.

In controller mode, select the panel used to enter driving with an empty hand. Adjacent panels connect without a wire.

For a gearbox: select a gear lever, supported ordinary lever or pedal first, then the gearbox.

For typing: select a keyboard first, then a computer module or a regular CC:Tweaked computer.

Radar disk: select the computer, then a Create Radar Network Controller. Connect radars and aiming controllers to it using Create Radar tools.

Gear Selector

A gearbox control lever: selector, sequential or H-pattern.

Install it on a panel. Click the lever with the black Panel Link Wire, then the gearbox, to pair them.

Right-click the lever with a wrench for its settings; gear count and ratios are configured on the gearbox.

Right-click the lever with an empty hand to drive. Hold its assigned grab button and move the white cursor along the gates.

The selector confirms on grab release. Manual gates connect through the central N line.

If a clutch is connected, press it before moving the lever; keep it held for several sequential shifts.

Esc exits driving. The gearbox needs at least 50 RPM at its input.

Internal Module Wire

The red Internal Module Wire links an input module to a lamp or another supported output module.

Right-click a button, lever or another input to select the signal source.

Click the source again to cycle its channels. On a keyboard, click the desired key.

Right-click a lamp to create a link. The source stays selected for additional lamps.

Linking the same pair again removes the link. Shift + right-click clears the selected source.

Impulse Pedal

An analog pedal with a 0–15 signal and throttle, brake or clutch roles.

Before placement, T rotates the pedal by 90 degrees. Right-click a panel to install it.

The Create wrench cycles its role. The DashPanels wrench opens key assignments.

Select the pedal with the black Panel Link Wire, then click the gearbox to pair it. Each role can have its own pedal.

Hold the assigned key while driving the panel. Releasing it releases the pedal.

The brake pedal selects reverse only in automatic mode A. In manual modes, select reverse with the lever.

Rotary Control

A rotary control providing an adjustable 0–15 analog signal.

Install it on a panel. Right-click with the DashPanels wrench to assign increase and decrease actions.

Enter panel driving, then use the assigned keys or mouse grab control.

Route the signal through Panel Links, the module linker or the invisible-wiring cable.

Use the available module channels for individual directions or actions.

Geared Traverse Mechanism

A rotary control providing an adjustable 0–15 analog signal.

Install it on a panel. Right-click with the DashPanels wrench to assign increase and decrease actions.

Enter panel driving, then use the assigned keys or mouse grab control.

Route the signal through Panel Links, the module linker or the invisible-wiring cable.

Use the available module channels for individual directions or actions.

Lever

A lever providing an adjustable 0–15 analog signal.

Install it on a panel. Right-click with the DashPanels wrench to assign increase and decrease actions.

Enter panel driving, then use the assigned keys or mouse grab control.

Route the signal through Panel Links, the module linker or the invisible-wiring cable.

This lever can control a gearbox: select the lever with the black Panel Link Wire, then the gearbox.

Minecraft Chick

A decorative panel module. It does not control a gearbox or replace a signal input.

Hold the item over a free panel surface: the preview shows its position and orientation.

Right-click to install it. Use Shift + right-click with the DashPanels wrench to remove it.

Desk Fan

A decorative panel module. It does not control a gearbox or replace a signal input.

Hold the item over a free panel surface: the preview shows its position and orientation.

Right-click to install it. Use Shift + right-click with the DashPanels wrench to remove it.

Coffee Mug

A decorative panel module. It does not control a gearbox or replace a signal input.

Hold the item over a free panel surface: the preview shows its position and orientation.

Right-click to install it. Use Shift + right-click with the DashPanels wrench to remove it.

Bouncing Cake

A decorative panel module. It does not control a gearbox or replace a signal input.

Hold the item over a free panel surface: the preview shows its position and orientation.

Right-click to install it. Use Shift + right-click with the DashPanels wrench to remove it.

Steering Wheel

A steering wheel with separate left, right and button/horn signals.

Hold the wheel: R, T and Y rotate its placement on three axes; Shift reverses direction. V opens placement settings with a small/large model choice.

Hold (configured control) and scroll to adjust the offset. (configured control) cycles the axis: vertical, horizontal or depth.

Right-click a free panel surface to install it. Placement belongs to this item and resets after successful installation.

Right-click the installed wheel with a wrench to adjust steering speed and model.

Assign steering and horn in panel controls. Use the separate left, right and horn output channels.

Cool Yan

A decorative panel module. It does not control a gearbox or replace a signal input.

Hold the item over a free panel surface: the preview shows its position and orientation.

Right-click to install it. Use Shift + right-click with the DashPanels wrench to remove it.

Mod Creator

A decorative panel module. It does not control a gearbox or replace a signal input.

Hold the item over a free panel surface: the preview shows its position and orientation.

Right-click to install it. Use Shift + right-click with the DashPanels wrench to remove it.

Lead Coder and Developer

A decorative panel module. It does not control a gearbox or replace a signal input.

Hold the item over a free panel surface: the preview shows its position and orientation.

Right-click to install it. Use Shift + right-click with the DashPanels wrench to remove it.

Aircraft Lever

An aircraft lever with fixed positions 1–15 and neutral at position 8.

Install it on a panel; use the DashPanels wrench to assign forward and backward actions.

Positions 1–7 activate the negative channel; 9–15 activate the positive channel. Both are zero at position 8.

Directional strength grows toward the ends, up to 15. Channels work through Panel Links and linking tools.

Enter panel driving first, then use the assigned keys or module grab control.

Vector Pedal

An analog pedal with a 0–15 signal and throttle, brake or clutch roles.

Before placement, T rotates the pedal by 90 degrees. Right-click a panel to install it.

The Create wrench cycles its role. The DashPanels wrench opens key assignments.

Select the pedal with the black Panel Link Wire, then click the gearbox to pair it. Each role can have its own pedal.

Hold the assigned key while driving the panel. Releasing it releases the pedal.

The brake pedal selects reverse only in automatic mode A. In manual modes, select reverse with the lever.

Afterburner Pedal

An analog pedal with a 0–15 signal and throttle, brake or clutch roles.

Before placement, T rotates the pedal by 90 degrees. Right-click a panel to install it.

The Create wrench cycles its role. The DashPanels wrench opens key assignments.

Select the pedal with the black Panel Link Wire, then click the gearbox to pair it. Each role can have its own pedal.

Hold the assigned key while driving the panel. Releasing it releases the pedal.

The brake pedal selects reverse only in automatic mode A. In manual modes, select reverse with the lever.

Flight Yoke

A flight yoke with separate stick axes, grip rotation and four buttons.

Install it on a panel. The DashPanels wrench opens assignments for every axis and all four buttons.

While driving, move it with assigned keys or grab it with the mouse.

The central grip rotation returns to center when released, including while still driving.

The left/right, forward/back and roll_left/roll_right channels output 0–15. button_1–button_4 output 15 while held.

Onboard Terminal

An onboard computer combining a CC:Tweaked computer and display in one module.

Install it on a panel. Optional CC:Tweaked is required for operation; without it, right-click shows an installation hint.

Right-click to open the CC:Tweaked computer interface. Programs and files are stored on this computer.

To type without opening the interface, select a keyboard with the black Panel Link Wire, then this module.

Right-click the linked keyboard: mouse controls CC, Shift controls the camera. Drop .lua files from Explorer into the game and confirm CC import. Esc ends input.

Keyboard

A keyboard with a separate signal for every key and simultaneous multi-key input.

Install it and right-click with an empty hand to start typing. Its keys need no manual assignment.

For text, select the keyboard with the black Panel Link Wire, then an onboard computer, disk computer or CC:Tweaked computer.

During input, keys control this keyboard and its linked computer. Other mods’ shortcuts, including map keys, are suppressed.

For redstone, select a key with the module linker or choose its channel with the invisible-wiring cable.

Press Esc once to stop typing. Esc and Windows keys are never sent as signals or computer input.

Antique Keyboard

A keyboard with a separate signal for every key and simultaneous multi-key input.

Install it and right-click with an empty hand to start typing. Its keys need no manual assignment.

For text, select the keyboard with the black Panel Link Wire, then an onboard computer, disk computer or CC:Tweaked computer.

Characters and control keys are sent to the linked computer without opening its screen.

For redstone, select a key with the module linker or choose its channel with the invisible-wiring cable.

Press Esc once to stop typing. Esc and Windows keys are never sent as signals or computer input.

Cable

The cable sends a selected panel signal to a redstone receiver.

Right-click a panel with an input module to select a source. It is highlighted in yellow.

Scroll to choose the module and its channel. The selected channel name appears on screen.

Right-click another block to connect a receiver. The source stays selected so more receivers can be added.

Shift + right-click or clicking the source again cancels selection. Reconnecting the same pair removes its link.

Links reach up to 64 blocks within one dimension. Drive By Sable cable networks are supported when installed.

Disk Computer

A disk computer with CC:Tweaked, Create Radar, Snake or Orbital Shield boot disks.

Shift + right-click opens/closes the drive. Right-click an open empty tray with a disk to insert it and boot.

Right-click the open occupied tray with an empty hand to eject its disk. With no boot disk, the blue BIOS appears.

The CC disk runs CC:Tweaked; the radar disk needs Create Radar; Snake works without either mod.

Select a keyboard with the black Panel Link Wire, then this computer. Type directly from the keyboard without a separate window.

Radar: black wire to a Network Controller; connect radar and paired Auto Pitch / Auto Yaw using Create Radar tools. Shift-right-click the computer with the wire to disconnect.

Radar keeps last detected positions between scans. Aim at a mark and left-click to select it. Stopping the radar retains the last frame.

ComputerCraft Boot Disk

A boot disk selecting CC:Tweaked mode in the disk computer.

Requires optional CC:Tweaked. This selects a computer mode; it is not a CC filesystem disk.

Shift + right-click the disk computer to open its drive. Right-click an open empty tray with this disk to boot.

Right-click the computer for its console, or pair a keyboard with the black Panel Link Wire and type from it.

Right-click the linked keyboard to use the world display. Mouse controls the CC cursor; hold Shift for the camera. Drop .lua files from Explorer into the game and confirm CC import; Esc ends input.

Create Radar Disk

A radar boot disk. Requires optional Create Radar.

Open the disk computer drive with Shift + right-click and insert the disk with right-click.

Select the computer with the black panel wire, then a Network Controller. Radar and Auto Pitch / Auto Yaw must belong to its Create Radar network.

Aim your crosshair at a mark on the computer screen and left-click to select it. Empty-hand right-click clears the target. No keyboard or mouse capture required.

Right-click the linked keyboard for the cursor. Left-click selects, right-click clears, Shift moves the camera, Esc exits. Firing follows Create Radar settings.

Aim at the radar screen with an empty hand and scroll to zoom. +/- also works through a linked keyboard. Shift or the wrench preserves ordinary block/tool interaction.

Game Disk: Snake

A Snake boot disk. Neither CC:Tweaked nor Create Radar is needed.

Open the disk computer drive with Shift + right-click, then insert this disk with right-click.

Select a keyboard with the black Panel Link Wire, then the computer. Right-click the keyboard to play.

WASD or arrows steer; Space/Enter pauses; R restarts.

Esc stops input and pauses the game. Collect food and avoid walls and your tail.

Game Disk: Orbital Shield

Orbital Shield: defend the pixel planet from incoming alien shots. Only the planet, shield and projectiles appear; no optional mods required.

Open the disk computer drive with Shift + right-click, then insert this disk with right-click.

Select the keyboard with the black Panel Link Wire, then the computer. Right-click the keyboard to start input.

Right-click the linked keyboard, then press Enter or click the computer screen to start. Mouse capture begins with play: point around the planet to turn the shield.

Pause or game over releases the mouse to the camera. Three hits destroy the planet. Enter/P pauses; R restarts; Esc exits keyboard input.

Computer Speaker

A speaker attachment for onboard and disk computers.

Hold the speaker and right-click a computer to attach it on top. It cannot be placed directly on a panel surface.

In CC:Tweaked: peripheral.find("speaker") or peripheral.wrap("right"). Supports playNote, playSound and streaming playAudio for music.

Snake and Orbital Shield play short sounds through the installed speaker even without CC:Tweaked.

Aim at the attachment and Shift + right-click with a wrench to remove it. Removing/copying the whole computer preserves its speaker.

Floppy Disk: Maze

Maze game disk. No CC:Tweaked or Create Radar required.

WASD moves the ball to the center. R creates a new maze; Space pauses. Each new game generates a different maze.

Crawler Track Lever

A crawler track lever with three positions: reverse, neutral and forward.

Hold right-click and move the mouse forward/backward. The middle zone is neutral; releasing it keeps the chosen position.

The + channel drives forward and the - channel drives backward. Each output is only 0 or 15. Both are off in neutral.

Y mirrors; R rotates. (configured control) + scroll shortens or restores the shaft (0–16 px).

Bind controls using the wrench. Forward/backward keys move one step per press through neutral; holding does not repeat. Handle travel remains ±12°.

Speedometer

Displays the speed of the Sable contraption in km/h.