Skip to main content

Electro Utilities

Mod version shipped with FlammiCraft: 1.62.0

Starting in TDCreate 1.52.0, poles and their accessories appear in the TDCreate: Electro Utilities creative tab when Create: Electro Energetics is installed. Find the recipes in your recipe viewer. Open Ponder on a utility pole, substation pole, crossarm or label to see the corresponding setup.

Wiring utility poles

  1. Compact a log or Nether stem with 100 mB of Transformer Oil in a Basin under a Mechanical Press. Three treated wood items in a vertical line craft three utility poles.
  2. Place the first pole upright. Use another segment against the top or bottom to extend the column.
  3. Apply Electro Energetics connectors to the sides, or fit a crossarm to a free segment. Craft a crossarm from three basic connectors over three planks. It has two outer terminals and a center terminal when there is no pole segment directly above it.
  4. Connect the terminals with Electro Energetics wires. Its Pole Mount can attach to the side of the utility pole to support equipment such as a transformer.

Wrench the pole to turn the column and its crossarms in 45° steps. Wrench an outer arm to slide the crossarm along its beam. Both movements require space for the new arm positions. Sneak-wrench to remove the crossarm.

Wrenching off a single side connector disconnects all wires on that pole segment. Stacking another pole above a crossarm disconnects the center terminal and drops its wire.

Redstone and labels

Substation poles are available in treated wood and Light Gray Concrete. A vertical pole relays redstone from the base to the top. Feed the base and place the receiver directly above the top.

Press a brass nugget into a Utility Pole Label. Use it on the side of a pole, enter up to five characters on a utility pole or two on a substation pole, and confirm. Right-click the label face with an empty hand to edit it. Sneak-use with an empty hand to remove it.

IDs and switching

Examples include tdcreate:oak_utility_pole, tdcreate:concrete_substation_pole, tdcreate:utility_pole_crossarm and tdcreate:utility_pole_label. The integration is based on Create: Electro Utilities 0.2.1 by Adam Schiavone under MIT.

Account for existing poles and wiring before switching a world from the standalone mod. Existing electroutilities: IDs and their saved wires are not automatically migrated. Ponder, rendering and multiplayer interaction require separate client acceptance.